Newsflash

The drive for lightweight materials to reduce overall cost and environmental impact for automotive manufacturers is nothing new.  Fuel economy attracts car buyers too. That is how majority of steel parts have been replaced in F-150 pickup truck by aluminum parts, reducing overall weight over 500 pounds. Then there are alloys, carbon fiber and plastics composites.The ambition for lighter vehicles did not stop with alloys (magnesium, aluminum), and/or composites (glass, carbon fibers).  Recently, Japanese researchers at Kyoto University led by Professor Hiroaki Yano along with its industrial partners (Denso Corporation and Daikyo-Nishikawa Corporation) reported that they were developing cellulose nanofiber based materials for automotive as well as aircraft parts to reduce environmental footprint while increasing product performance.Inevitable questions are: 1) would these materials be cost effective? 2) What would be the service life of these products compared to the current ones? 3) How about the parts’ safety in situations like crash or fire?A final question that an automaker has to ask is: what would be the pay back time to replace current production line (machinery) to CNF based plastics line?Reference: https://www.japantimes.co.jp/news/2017/08/15/business/researchers-japan-use-wood-make-cellulose-nanofiber-auto-parts-stronger-lighter-metal/#.WbAIKeTXuUm...
We know polycarbonates mostly from its use in plastics water bottles, safety goggles, smart phones, structural panels (glazing) and the list goes on.  A quick look at Wikipedia gives a spectrum of applications.However, polycarbonates have its weaknesses along with the BPA (bis-phenol) controversy. Polymers such as polysulfates and polysulfonates have similar if not better mechanical properties than polycarbonates.  The issue has been how reliably scale-up the manufacturing process of polysulfates and polysulfonates?“Click chemistry” is a concept in organic chemistry by which highly reactive reactions provide high yielding products and require little to no purification.  The concept was introduced by Nobel Prize winner Professor K. Barry Sharpless in 2001.A recent work published in Nature Chemistry, by a team of researchers from The Scripps Research Institute (La Jolla), Lawrence Berkley National Laboratory (Berkley), California and Shanghai Institute of Organic Chemistry & Soochow University, China claimed that reduced cost of catalyst, product purity, and by-product recycling make their work ready to move from laboratory research to industrial process.Chemists are at work indeed!References:https://en.wikipedia.org/wiki/PolycarbonateK. Barry Sharpless et al; Nature Chemistry, 2017 DOI: 10.1038/nchem.2796...
In a recent The Atlantic interview Bill Gates made a wish on an energy miracle, “Here’s a source of energy that is cheaper than your coal plants, and by the way, from a global-pollution and local-pollution point of view, it’s also better”.  The race is on to find that source. One such energy source is solar energy. We all know that solar energy can be harnessed to generate thermal energy or electrical energy for use in the residential and/or in the commercial applications.  Any material that can store Solar Thermal Energy is called Solar Thermal Fuel (STF).  The quest to harvest solar energy, store the same and use it when needed has been the focus of research in industry and academia alike. For the first time, Professor Grossman’s team at MIT, Cambridge (USA) has come up with a new approach which uses polymer Solar Thermal Fuel (STF) storage platform utilizing STF in its solid-state.  According to the published article, researchers stated, “Closed cycle systems offer an opportunity for solar energy harvesting and storage all within the same material. This approach enables uniform films capable of appreciable heat storage of up to 30 Wh kg?1 and that can withstand temperature of up to 180 °C.”How the STF process works?Certain molecules (chemicals) can have 2 different stable structural forms. These structures are called conformations.  When original molecular conformation is exposed to sunlight, the molecule gets charged and the original conformation changes to the other and stay in that charged conformation for a long period.  The charged molecule snaps back to their original shape (conformation), when triggered by a very specific temperature or other stimulus generating heat in the process. Currently, developed polymeric film can release heat about 10 degree C above the surrounding temperature. Film property improvements are underway. German auto company BMW, has sponsored this research. Where the potential application lies - your guess is as good as mine.References:The Atlantic, p 56, November 2015Zhitomirsky, D., Cho, E. and Grossman, J. C. (2015), Solid-State Solar Thermal Fuels for Heat Release Applications. Adv. Energy Mater., 1502006. doi:10.1002/aenm.201502006...
In a recent The Atlantic interview Bill Gates made a wish on an energy miracle, “Here’s a source of energy that is cheaper than your coal plants, and by the way, from a global-pollution and local-pollution point of view, it’s also better”.  The race is on to find that source. One such energy source is solar energy. We all know that solar energy can be harnessed to generate thermal energy or electrical energy for use in the residential and/or in the commercial applications.  Any material that can store Solar Thermal Energy is called Solar Thermal Fuel (STF).  The quest to harvest solar energy, store the same and use it when needed has been the focus of research in industry and academia alike. For the first time, Professor Grossman’s team at MIT, Cambridge (USA) has come up with a new approach which uses polymer Solar Thermal Fuel (STF) storage platform utilizing STF in its solid-state.  According to the published article, researchers stated, “Closed cycle systems offer an opportunity for solar energy harvesting and storage all within the same material. This approach enables uniform films capable of appreciable heat storage of up to 30 Wh kg?1 and that can withstand temperature of up to 180 °C.”How the STF process works?Certain molecules (chemicals) can have 2 different stable structural forms. These structures are called conformations.  When original molecular conformation is exposed to sunlight, the molecule gets charged and the original conformation changes to the other and stay in that charged conformation for a long period.  The charged molecule snaps back to their original shape (conformation), when triggered by a very specific temperature or other stimulus generating heat in the process. Currently, developed polymeric film can release heat about 10 degree C above the surrounding temperature. Film property improvements are underway. German auto company BMW, has sponsored this research. Where the potential application lies - your guess is as good as mine.References:The Atlantic, p 56, November 2015Zhitomirsky, D., Cho, E. and Grossman, J. C. (2015), Solid-State Solar Thermal Fuels for Heat Release Applications. Adv. Energy Mater., 1502006. doi:10.1002/aenm.201502006...
Reliable and high performance lithium ion batteries commonly known as LIBS are highly sought after product by industries. We all have heard stories about laptops, electric vehicles, airplanes catching fires due to LIBS. Underlying problem is the battery overheating. Preventing batteries from overheating is crucial to the public safety.  Now a team of researchers at Stanford University designed a thermo-responsive (heat sensitive) plastic composite film made from polyethylene and spiky nickel microparticles coated with graphene which shuts down the battery if the temperature is too high.         In a recently published work led by Yi Cui and Zhenan Bao of Stanford University, USA concluded “Safe batteries with this thermoresponsive polymer switching (TRPS) materials show excellent battery performance at normal temperature and shut down rapidly under abnormal conditions, such as overheating and shorting.” How practical this design approach is? Time will tell.References: Y. Cui, Z. Bao et al Nature Energy vol.1, Article number: 15009 (2016); DOI: 10.1038/nenergy.2015.9Chemical & Engineering News, Page 7, January 18, 2016...
In aviation industry, the focus is how to improve fuel safety and handling. Mike Jaffe and Sahitya Allam gave their perspective on safer fuels by integrating polymer theory into design (Science, 350, No. 6256, p. 32, 2015).Mist (generated from the fuel) is much more flammable than the liquid and that is why anti-misting kerosene interferes with mist formation when a low percentage of a polymer is added into it.  The problem however, is that the polymer chain undergoes scission during handling and can’t assist in suppressing mist formation. The answer comes from a recent paper published in the Journal Science by Professor Julia Kornfield and her cross-functional team at Caltech, Pasadena, USA. The group designed a megasupramolecules having polycyclooctadiene backbones and acid or amine end groups (telechelic polymer) which is short enough to resist hydrodynamic chain scission while protecting covalent bonds through reversible linkages. Yes, polymers can be designed to suit our societal needs including aviation fuel safety.Reference: M-H Wei, B. Li, R.L. Ameri David, S.C. Jones, V. Sarohia, J.A. Schmitigal and J.A. Kornfield; Science, 350, (6256), pp. 72-75 (2015)...
At the TED conference, Carbon3D, a Vancouver based company touted a radical 3D printing technology and named it CLIP or Continuous Liquid Interface Product. CLIP grows parts instead of printing them layer by layer. It harnesses light and oxygen to continuously grow objects from a pool of resin.  The result: make commercial quality parts at game-changing speed.  CLIP is 25 to 100 times faster than traditional 3D printing technique.  To make the point, Carbon3D web site provides a head-to-head comparison of CLIP to Polyjet, SLS and SLA.[Press release: March 16, 2015, Vancouver, Canada.  www.carbon3D.com]...
Self-healing plastics has been around for a while. Applications include self-healing medical implants, self-repairing materials for use in airplanes and spacecrafts. Even scientists have made polymeric materials that can repair itself multiple times. A recent report in Science describes a significant advance in self-healing plastics. The authors describe a product that mimics how blood can clot to heal a wound. When the plastic is damaged a pair of pre-polymers in channels combines and rapidly forms a gel, which then hardens over 3 hours.The authors demonstrated that holes up to 8 millimeters wide can be repaired. The repaired parts can absorb 62% of the total energy absorbed by undamaged parts.  Science never stops.Reference:S. R. White, J. S. Moore, N. R. Sottos, B. P. Krull, W. A. Santa Cruz, R. C. R. Gergely; Science, Restoration of Large Damage Volumes in Polymers, Vol. 344 no. 6184 pp. 620-623; (9 May 2014). ...
Knowingly or unknowingly, flexible electronics has become a part of our daily life.  Transparent conductive films (TCFs) are used in mobile phones, tablets, laptops and displays.  Currently, Indium Tin Oxide or commonly known as ITO is the material of choice.  But use of ITO has some major disadvantages and these are brittleness, higher conductivity at greater transparency, and supply of Indium.  This is where non-ITO materials come into play. Based in St. Paul, Minnesota (USA), Cima NaoTech’s uses its SANTETM nanoparticle technology, a silver nanoparticle conductive coating which self-assembles into a random mesh like network when coated onto a flexible substrate such as PET and PC.  According to a recent press release, the company stated SANTETM nanoparticle technology enabled transparent conductors in a multitude markets from large format multi-touch displays to capacitive sensors, transparent and mouldable EMI shielding, transparent heaters, antennas, OLED lighting, electrochromic and other flexible applications.  Cima NanoTech is working with Silicon Integrated Systems Corp. (SIS) of Taiwan and using its highly conductive SANTE FS200TM touch films to develop large format touch screens.References: Press release, San Diego, June 03, 2014; www.cimananotech.com ; http://www.cimananotech.com/sante-technology ; http://www.sis.com/...
In an article appeared today (January 29, 2014) in The Guardian newspaper, Stuart Dredge wrote, “From jet parts to unborn babies, icebergs to crime scenes, dolls to houses: how new technology is shaking up making things”1. Mr. Dredge was speaking about 3D printing technology.  The heart of this technology is the 3D printer itself. Stratasys, a company headquartered in Minneapolis, USA is the manufacturer of 3D printers.  It recently announced the launch of Color Multi-material 3D Printer, the first and only 3D printer to combine colors with multi-material 3D printing.  According to the press release2, by using cyan, magenta, and yellow, multi-material objects can be printed in hundreds of colors.  The technology is based on proven Connex technology.  While the base materials are plastics and elastomers, they can be combined and treated to make finished products of wide ranging flexibility and rigidity, transparency and opacity.  Designers, engineers and manufacturers can create models, mold, and parts that match the characteristics of the finished production part. This includes achieving excellent mechanical properties.  According to the manufacturer, print job in the newly revealed printer can run with about 30 kg of resin per cycle and prints as fine as 16 micron layers for models.  No wonder why some call the new Color Multi-material 3D printer a groundbreaking stuff.References: 1. www.theguardian.com.technology/2014/jan/29/3d-printing-limbs-cars-selfies (January 29, 2014)2. http://investors.stratasys.com/releasedetail.cfm?ReleaseID=821134 (August 3, 2014)...
Instead of stitches or skin staples, doctors use skin glue to close wounds. The glue joinsthe edges of a wound together while the wounds heal underneath. Most of the timeskin glue is used for simple cuts or wounds. According to the paper published inScience Translational Medicine, there are no clinically approved surgical glues thatare non-toxic, bind strongly to tissue, and work well in wet and highly dynamicenvironments within the body. This is the reason why this published work is promisingwhere infants born with heart defects would benefit tremendously. Researchers at the Brigham and Women’s hospital in Boston have engineered ‘bio-inspired’ gluethat can bind strongly to tissues on demand, and work well in the presence ofactively contracting tissues and blood flow. The authors of the paper show howthe glue can effectively be used to repair defects of the heart and blood vessels during minimally invasive procedures. [References: P. J. del Nido et al; Sci. Transl. Med., DOI: 10.1126/scitranslmed.3006557; See also, www.geckobiomedical.com/news/gecko-biomedicals-co-founde.html]...
Stability of organic electronics in water is a major research challenge. For this reason,organic electronics has yet to see any sensing application in aqueous environment.However, as understanding of underlying mechanism of stability aspect is becomingclearer, new developmental efforts to make water compatible organic polymer devicesare taking place. Recently, Professor Zhenan Bao’s group in the department of chemical engineering at Stanforduniversity revealed in a paper published in the journal of Nature Communications thatsolution- processable organic polymer could be stable under both in freshwater andin seawater. Developed organic field-effect transistor sensor is able to detect mercury ionsin the marine environment (high salt environment). Researchers believe that the work hasthe potential to develop inexpensive, ink-jet printed, and large-scale environmental monitoring devices. [References: O. Knopfmacher, M.L. Hammock, A.L. Appleton, G. Schwartz, J. Mei, T. Lei, J. Pei,and Z. Bao; Nature Communications, 5, 2954, January 6, 2014; DOI: 10.1038/ncomms3954]...
Insulin, the wonder medicine for diabetes was discovered about a century ago.Since insulin does not get into the blood stream easily, diabetes patients oftenhave injected themselves with insulin. Now a group of scientists led by Dr. Sanyog Jainat the Center for Pharmaceutical Nanotechnology of National Institute of Pharmaceutical Education and Research in Punjab, India has designed a polymerbased package for oral insulin administration. The package design addresses two major obstacles, 1) digestive enzymes must notdegrade insulin prior to its action and 2) the insulin gets into the blood stream.The package contained folic acid functionalized insulin loaded in liposomes.To protect the liposomes (lipids or fat molecules) they were alternately coated withnegatively charged polyacrylic acid (PAA), and positively charged poly allylamine hydrochloride. Studies were conducted to compare the efficacy of bothdelivery systems: designed polyelectrolyte based insulin and standard insulinsolution. Effects of oral administration lasted longer than that of injectedinsulin, authors reported in a recent article in Biomacromolecules. [Reference: A.K. Agarwal, H. Harde, K. Thanki, and S. Jain; Biomacrmolecules, Nov. 27, 2013;DOI: 10.1021/bm401580k]...
Research in the area of stretchable electronics is heating up!  Thanks to polymers. Led by Professor George M. Whitesides of Harvard University (USA), a team of researchers have demonstrated in a recently published paper in Science that ionic conductors can be used in devices requiring voltages and frequencies much higher than commonly associated with devices using ionic conductors.  The team showed for the first time that electrical charges carried by ions and not electrons, can be utilized in fast-moving, high voltage devices.As a proof of concept, the authors of the study built a transparent loudspeaker that produces sound across the full audible range i.e., 20 Hz to 20 kHz.  Components [such as VHB 4910 tape (acrylic tape with PE liner), polyacrylamide hydrogel containing NaCl electrolyte] used for the high speed, transparent actuators are described in the paper.Tissues and cells are soft and require stretchable conductors for biological systems. Many hydrogels are biocompatible which makes this work particularly an important one. The design of gel-based ionic conductors is highly stretchable, completely transparent and offer new opportunities for designers of soft machines.   [Reference: C.Keplinger, J-Y. Sun, C.C. Foo, P. Rothemund, G.M. Whitesides, and Z. Suo; Science, 341 (6149), pp. 984-987 (2013); DOI: 10.1126/science.1240228]...
Interweaving biological tissue with functional electronics, one can make bionic ears.  NASA has tested 3D-printed rocket engine part.  Then why not 3D print yourself?Well, Twinkind, a German start-up company is now offering enthusiasts statues of themselves for display.  How this works?  A full body scanner takes an image of the customer’s body, transfers the file to the printer after which 3D printer laser sinters a composite powder layer by layer into the customer image.Can we dare to say that Madame Tussauds wax figure of Voltaire can now be 3D printed in polymers soon!  [Reference: www.twinkind.com ]...
Polymer membranes have become a leading contender in numerous separation processes.  Be it in gas (air, hydrogen etc.) or be it in water purifications (salinated water, waste water etc.).  Not only polymer membrane technology helps reducing the environmental impact but also it is cost-effective.  Fracking in shell gas is one of many examples. New advances in drilling technology (such as horizontal drilling) have led to new hydraulic fractures called fracking.  Hydraulic fracturing requires about 2.5 to 5 million gallons of water per well.  Water management and its disposal are major costs for producers.One major challenge, however, of the membrane technology is the fouling (damage caused by contaminants) mitigation.  This has been recently studied by a group of researchers from University of Texas at Austin led by Professor Benny Freeman to address efficiency and reuse of water for fracking in shale gas plays.Researchers modified polydopamine coated UF (ultrafiltration) module by grafting polyethylene glycol brushes onto it.  The result is more hydrophilic surfaces which in turn improved cleaning efficiency relative to unmodified modules. The coating improves the membrane life, and can easily be applied to membrane surface by rinsing it through the recycling system.[References: D.J. Miller, X. Huang, H. Li, S. Kasemset, A. Lee, D. Agnihotri, T. Hayes, D.R. Paul, and B. Freeman; J. Membrane Sci., 437, pp. 265-275 (2013); Also see www.advancedhydro.net ]...
Flexible electronics can change the way we use electronic devices.  It is a term used for assembling electronic circuits by mounting electronic devices on a flexible plastic. A recent review article captured the advancement of CNT and graphene based flexible thin film transistors from material preparation, device fabrication to transistor performance control compared to traditional rigid silicon1. Silicon is used almost exclusively in electronic devices.Now Prof. Ali Javey led a team at the University of California, Berkley to develop a printing process to make nanotube transistors at room temperature with gravure printer.  The plastics used is polyethylene terephthalate (PET). The device exhibited excellent performance with mobility and on/off current ratio of up to ~9 cm2/ (V s) and 105 respectively.  Also, maximum bendability is observed.  The paper authors conclude that this high-throughput printing process serves as enabling nanomanufacturing scheme for range of large-area electronic applications based on nanotube networks2. References:1. D-M. Sun, C. Liu, W-C. Ren and H-M Cheng; Small, DOI: 10.1002/smll.2012031542. P.H. Lau, K. Takei, C. Wang, Y. Zu, J. Kim, Z. Yu, T. Takahashi, G. Cho, and Ali Javey; Nano Letters, 13 (8), pp. 3864-3869 (2013); DOI. 10.1021/nl401934a...
Drinking coffee from paper cups are as common as drinking water from plastics bottle. The issue however, is recycling of disposable cups. The disposable cups are made up of 90-95% of high strength paper (fibers) with a 5% thin coating of plastic (PE).To address the recycling issue, James Cropper Speciality Papers of UK have developed a process which involves softening the cup waste, and separating the plastic coating from the fiber.  After skimming off the plastic, remains are pulverised and recycled, leaving water and pulp behind.  According to the company news release, the high grade pulp is reused in luxury papers and packaging materials.An innovative approach to address a common problem.[Reference: www.jamescropper.com/news ]...
A search for an alternative to rigid silicon wafers gave birth to the area of flexible or bendable electronics. Research has been intense for the past few years in the area flexible electronics as it opens up multitude of new applications. Polymers play an important role to exciting field of flexible electronics.In a recent research report, a team of scientist led by Prof. Ali Javey of University of California, Berkeley (USA)  has shown for the first time user-interactive electronic skin or e-skin can conformally wrap irregular surfaces and spatially map and quantify various stimuli through a built-in active matrix OLED display.  Three electronic components namely thin film transistor (uniform carbon nanotube based), pressure sensor, and OLED arrays (red, green, and blue) are integrated over a plastic substrate.  Spin coated and cured polyimide on a silicon wafer is used as the flexible substrate.  Details are in the paper.This work essentially provides a technology platform where integration of several components (organic and inorganic) can be done at a system level on plastic substrates. According to the paper, this e-skin technology could find applications in interactive input/control devices, smart wallpapers, robotics, and medical/health monitoring devices.    [Ref: C. Wang, D. Hwang, Z. Yu, K. Takei, J. Park, T. Chen, B. Ma, and Ali Javey; Nature Materials, Published online July 21, 2013; DOI: 10.1038/NMAT3711]...
Recent buzz in the technology world is 3D printing.  Researchers to designers are creating new products everyday using 3D printing technology.  Even eBay has unveiled its services to those looking to make their own creations using 3D printing App.Since ages composites have played a crucial role in our society. Inspired by natural (biological) composites such as bone or nacreous abalone shell, researchers from MIT (USA) and Stratasys have developed composite materials that have fracture behaviour similar to bones.  Using computer model with soft and stiff polymers, the team has come up with a specific topological arrangements (hierarchical structures) of polymer phases to boost the mechanical behaviour in the composites.Interestingly, the team has been able to manufacture (thanks to 3D printing) a composite material that is more than 20 times larger than its strongest constituent.  The referenced paper showed that one can use computer model to design composite materials of their choice, tailor the fracture pattern and then use 3D printing technology to manufacture the composites.[Ref: L.S. Dimas, G.H. Bratzel, I. Eylon, and M.J. Buehler; Advanced Functional Materials, Published online June 17, 2013; DOI: 10.1002/adfm.201300215]...

timw fig 1  The screw is the heart of an injection molding process. Over the past several decades, screw design for the injection molding process has played a vital role in delivering high quality and value added plastics parts. That’s where the story begins.

The origins of Injection Moulding

In 1868, John Wesley Hyatt invented a way to make billiard balls by injecting celluloid into a mold, perhaps in response to a request by billiard ball maker Phelan and Collander. By 1872, John and his brother Isaiah Hyatt patented the injection molding machine. This paper will discuss the evolution of the use of barrier / mixing screw technology in the injection molding process for the plasticating (melting and mixing) of polymers from early plunger machines to today’s sophisticated injection molding equipment. Although John and his brother Isaiah Hyatt patented the injection molding machine that was primitive yet it was quite suitable for their purposes. It contained a plunger to inject the plastic into a mold through a heated cylinder.

While this injection molding machine used a plunger to melt the polymers and force the material into molds, feed screws were already being used to process rubber. However we had to wait until 1946, when James Hendry replaced Hyatt’s plunger in the first screw injection molding machine for the revolution that changed the plastics industry. Hendry’s machine used an auger placed inside the cylinder to mix and melt the polymer, before conveying it forward and injecting the polymer into the mold. Almost all today’s injection molding machines use this technique.

Early plunger presses had straight bore cylinders, which were filled with resin (Figure 1).

timw fig 1

Figure 1

Since plastics are very good insulators, it took an excessive amount of time to completely melt the resin in the center of the cylinder. There was thus a need to reduce the time needed to melt the resin in preparation for injection into the mold.

The first improvement on the plunger machine was the installation of a “torpedo” in the cylinder (Figure 2) that would fill some of the volume in the cylinder to reduce the amount of resin in the bore of cylinder, reducing the residence time of the resin. With this improvement, the plunger would then force the resin out near to the interior bore of the cylinder so that the amount of resin required to fill the mould could be heated much more quickly, reducing the cycle time of the molding machine.

 

timw fig 2

Figure 2

One of the benefits of the plunger type molding machines was the capability of producing parts which had a “mottling” effect in the end products as shown in Figure 3.

timw fig 3

Figure 3

The mottling of parts is easily obtained with a plunger machine and is used to produce interesting looking products such as eyeglass frames, compacts, and fashion accessories. The only downside of this mottling effect is that the pattern is not repeatable and each part is unique.

Similar effects are very difficult to obtain with today’s injection molding machines because screw rotation causes mixing.. As a result some companies still continue to use plunger molding machines to produce parts with this unique mottling effect in the part.

What were the Next steps?

James W. Hendry’s early extrusion machines (Figure 4) used a rotating screw to convey and melt the plastic. The screw conveyed, melted, and pumped the plastic into a plunged or shooting pot which, in turn, filled the mold. This process improved mixing of the processed resins and gave much higher production rates.

timw fig 4

Figure 4

The next step was the reciprocating screw, generally regarded as having been developed in the U.S., William Willert at Egan Machinery in 1952 and patented in 1956 (Figure 5).

timw fig 5

Figure 5

Some credit Hans Beck of BAST in Germany with inventing the first reciprocating-screw machine in 1943. He also filed for a patent but reciprocating-screw molding machines were not commercialized in Europe or the U.S. until a decade later.

How do we describe a Screw?

The reason for going through the history of injection molding is to understand the common nomenclature that is used in describing the various parts of the screw itself (Figure 6)

 

timw fig 6

Figure 6

 

As shown in Figure 6, the L/D ratio of a screw is the flighted length divided by the nominal screw diameter, so for example, on a 40mm screw, if the flighted length was 640mm long then the screw L/D would have been a 16:1 L/D screw.

Almost all early injection machines had only 16:1 L/D injection units installed on them. Also, most of the early injection units on these machines had a 4:1 L/D injection stroke or reciprocation for filling the mold. As shown in Figure 7, the feed section is effectively shortened by the reciprocation screw as it accumulate enough molten polymer to fill the mold, In the example of a 16:1 L/D screw, if a full shot of 4 L/D is required then the actual plasticating length of the screw is only 12:1 L/D.

timw fig 7

Figure 7


As engineers began to understand how the reciprocation stroke of the injection unit affected the performance of the early injection screws, they resolved the problem associated with conveying solids by using screw design technology that had been developed for extrusion screws.

They maintained the same proportions that were being used in many early general purpose extrusion screws (33% in the feed section, 33% in the compression section, and 33% in the metering section of the screw). Thus, after allowing the four diameters of the screw for the reciprocating action of the screw, they divided the 16:1 L/D injection screws into 4 L/D in the feed for stroke, 4 L/D for solids conveying of the pellets, 4 L/D of compression for the melting of the polymer and finally 4 L/D in the metering for finishing the melting process and pumping as shown in Figure 8.

timw fig 8

Figure 8

 

This configuration became known as 50/25/25 geometry, which stood for the percentage of the overall flighted section for each section of the screw.

The next term that is commonly used to describe a screw design is its compression ratio (CR). The the compression ratio (CR) of a three zone screw is defined as the depth of feed section (feed depth, mf) divided by the depth of the metering section (metering depth, mm) as indicated in the equation below:

timeqn1  

Thus a screw which would have a feed depth of .300” and a metering depth of .100” would have 3:1 Compression ratio.

timexmple1(Example 1)

For many years, injection molding processors described their screws using only the L/D and the compression ratio. Thus a typical screw might be described as a ‘General Purpose 50/25/25 screw with a 3:1 compression ratio’. As explained below this would result in variability since one Original Equipment Manufacturer (OEM) or screw manufacture would not use the same depths as another OEM or screw manufacturer.

If a screw is described only by its compression ratio, the depth of the screw flights can still vary. A screw of the same diameter with a 3:1 compression ratio could have totally different depths in the metering and feed sections. For example:

timexam2(Example 2)

Examples 1 and 2 describe common section depths used on 65mm screws which have totally different processing capacities. The screw for Example 1 would have a lesser recovery rate, in other words, it would require a longer time to accumulate the needed polymer to fill the mold and a much higher channel shear rate than the screw of Example 2

The depths in Example 1 would be suitable for a low viscosity engineering resin such as Nylon, PET, or PEEK. Resins such at PE or PP could also be processed with this screw but at a much reduced recovery rate.

A screw with the depths shown in Example 2, would be more typical for a PE or PP resin, but would not process the engineering resin very well at all.

For nearly two decades (1950-1970), the injection molding industry mostly used the reciprocating screw as the only a means of conveying the resin forward and forcing it into the mold.

During these years problems were frequently encountered with color uniformity, when color concentrate was being added to virgin resin. If color uniformity was critical, pre-colored resins were often used. An alternative was to improve mixing by increasing the back pressure on the injection unit so to increase the residence time in the screw and allow the screw to work the master-batch enough to improve the color dispersion.

The down-side of using increased backpressure for improving mixing was that it would always increase the plasticating time, and very often increases the melt temperature of the resin. Both of these elements would increase the overall cycle time of the total injection molding process.

As the need to improve production rates became necessary as the growing injection molding industry was rapidly growing in throughout the world, new and ingenious plasticating technology was developed starting in the late 1960s and early 1970s.

These new developments will be covered in the Part 2 of this article.  Stay tuned ......

 

References

Plastics Technology, October 2005, “No. 1- Reciprocating-Screw Injection”

US Patent 2,705,342 – Hendry Apr 5, 1955

US Patent 2734226 – Willert Feb 14, 1956

Kunststoffe, Vol. 92 (2002), “Plasticising in Critical Areas-Exhausting the Potential of the Single Screw”

 

Timothy W. Womer, CPlasT

Tim Womer, is the President of TWWomer & Associates, LLC and was the 2006-2007 President of the Society of Plastics Engineers and a member of the SPE Extrusion Board of Directors for the past 20 years. Tim is only one of five SPE members ever to receive three of the highest awards presented by SPE, Distinguished Member, Honored Service Member and Fellow of the Society. He is also a member of the Plastics Pioneers Association and serves on the SPI Educational Committee.

Tim is a recognized authority in plastics technology and machinery with a career spanning over 35 years; having worked for other companies like Xaloy, Inc., Spirex Corporation, Conair Group and NRM Corporation.

Tim has designed thousands screws that have been used in all areas of single-screw plasticizing such as extrusion, blow/injection molding. Numerous patents have been issued for his inventions of screws, mixers, processes and other products. He also
has extensive knowledge and experience in heat transfer rolls used in the plastic sheet and paper laminating fields. Tim has spoken all over the world at various technical seminars and also private corporations, training individuals on processing techniques and fundamental applications of the screw technology. He has written numerous technical papers for SPE, TAPPI and the Wire Assoc. and has published several chapters in various books and magazines on screw design and screw manufacturing.